Airsoft Project 1.0 part3 (final part) | 3d Printed Airsoft v1.0

-



Hey guys. Finally my diy channel has 50 videos. Meanwhile, this video is also the final part of airsoft project 1.0. PS:Are you looking forward to the airsoft project 2.0 ;)


Video:click here

STL files: click here


chapter I:


Ok first of all, let’s talk about this airsoft gun. At first the piston is very very tight. But don’t worry, the resolution is very easy. It's just pull and push again and again until you can feel the piston move inside the cylinder smoothly enough and that time this piston compressor will get the best situation.  



This airsoft finally looks more like a real airsoft pistol from the factory than before. At least, it can shoot very well and can put 3 bullets in this gun, yeah there is a magazine inside the gun although now still can not change the mag. Overall, I believe that this blaster is one of the coolest works in my channel, although now this gun is just a thing which can shoot soft bbs and its shape is very crude as well. 



Chapter II: Print Setting


Files Name: barrel pin v1.0 & trigger pin1 v1.0 & trigger pin2 v1.1








Files Name: barrel v1.0






Files Name: body1 v1.1






Files Name: body2 v1.1




Files Name: body3 v1.1





Files Name: body4 v1.0 & body5 v1.0




Files Name: :body6 v1.0




Files Name: cylinder v0.1.3




Files Name: mag spring v1.1





Files Name: nail1 v1.0 & nail2 v1.0 & nail3 v1.0 & nail4 v1.0 & nail5 v1.0





Files Name: piston v1.0



Files Name: trigger1 v1.0 & trigger2 v1.0




Chapter III:


There are some things which need to be taken notice. First is to remove the supports. Actually the supports are not very easy to remove but if you have enough patience and keep careful, just slowly, you will get it. 


Second, that bullet. We need to take a 6mm soft rubber ball and plug it into the shell. But when making this bullet, we can’t plug the small ball with too much force. It’s just putting one of them on the top of the shell and then pushing it inside the shell gently. Plus, this bullet still has a little bit of problems and it results that the gun will probably meet the situation of jamming. So now we have a point which needs to be upgraded next time. Fortunately, this blaster can work very well. If this gun just is jammed, the resolution is very easy, just unload this bullet and then here we go we can continue to shoot this gun.








Comments

Post a Comment

Popular posts from this blog

How to Make a karambit from Cardboard (kraft paper 1.5mm)

-
Image
  Project Difficulty Level:  ★ ★ ★ ★ [The diffcult point is to cut the hard kraft paper because this kraft paper is really hard although it is just 1.5mm thick] Template download:  link   [this template is svg files so if you want to print, it's better to convert the svg to pdf in order to print easier and this a convertor website which I always use] Video:  link This time my materials I used is a hard kraft paper and its thickness is 1.5mm. This is very good material but it's just too hard so if this kraft paper is 2mm thick or 3mm thick or thicker it will be very difficult to cut extremely. Actually this project's main diffcult point is how to cut it and it's only one point which need to solve. When made this project I found that I can use a awl to punch holes along the edge line firstly and then use the paper knift to cut the cardboard along those holes. It will be easier to cut. 
Read more

3d Printed Airsoft project part2 | can change bullet

-
Image
     Hey guys, today the part 2 of 3d printed airsoft pistol is coming. It's a little bit unexpected.  This project’s difficulty is harder than I expected. So maybe this project will have more parts. And here is the STL files just click THIS STL download . Video of this project I. My print settings file name: barrel+ file name: body pin1 & body pin2 file name: body1 file name: body2 file name: body3 & body4 file name: bullet casing+ file name: cylinder file name: piston file name: trigger pin1 & trigger pin2 file name: trigger1+ & trigger2+ II. The Expenrice of Making This Blaster Part 1 of this project I tried to make a 3d printed piston compressor as an object which verifies if the project is feasible and that was surprisingly successful work. So from that time I had confidence to finish this project. I want to get a real 3d printed airsoft, in which all the parts are made with 3d printing as much as possible. So that also is the difficult point and I am trying
Read more

How to Make a Brass knuckles from Cardboard (Kraft Paper)

-
Image
  Project Difficulty Level:  ★ ★ Template download:  link [this template is svg files so if you want to print, it's better to convert the svg to pdf in order to print easier and this a  convertor website  which I always use] Video:  link here the  *link  is the way of how to cut the hard kraft paper. This time This project haven't small parts   so this project actually is very easy to make. It's just cut and glue them and it will be ok.  
Read more