How to Make a karambit from Cardboard (kraft paper 1.5mm)

-

 


Project Difficulty Level: ★★★★

[The diffcult point is to cut the hard kraft paper because this kraft paper is really hard although it is just 1.5mm thick]

Template download: link 

[this template is svg files so if you want to print, it's better to convert the svg to pdf in order to print easier and this a convertor website which I always use]


Video: link


This time my materials I used is a hard kraft paper and its thickness is 1.5mm. This is very good material but it's just too hard so if this kraft paper is 2mm thick or 3mm thick or thicker it will be very difficult to cut extremely.

Actually this project's main diffcult point is how to cut it and it's only one point which need to solve. When made this project I found that I can use a awl to punch holes along the edge line firstly and then use the paper knift to cut the cardboard along those holes. It will be easier to cut. 









Comments

Post a Comment

Popular posts from this blog

3d Printed Airsoft project part2 | can change bullet

-
Image
     Hey guys, today the part 2 of 3d printed airsoft pistol is coming. It's a little bit unexpected.  This project’s difficulty is harder than I expected. So maybe this project will have more parts. And here is the STL files just click THIS STL download . Video of this project I. My print settings file name: barrel+ file name: body pin1 & body pin2 file name: body1 file name: body2 file name: body3 & body4 file name: bullet casing+ file name: cylinder file name: piston file name: trigger pin1 & trigger pin2 file name: trigger1+ & trigger2+ II. The Expenrice of Making This Blaster Part 1 of this project I tried to make a 3d printed piston compressor as an object which verifies if the project is feasible and that was surprisingly successful work. So from that time I had confidence to finish this project. I want to get a real 3d printed airsoft, in which all the parts are made with 3d printing as much as possible. So that also is the difficult point and I am trying
Read more

How to Make a Brass knuckles from Cardboard (Kraft Paper)

-
Image
  Project Difficulty Level:  ★ ★ Template download:  link [this template is svg files so if you want to print, it's better to convert the svg to pdf in order to print easier and this a  convertor website  which I always use] Video:  link here the  *link  is the way of how to cut the hard kraft paper. This time This project haven't small parts   so this project actually is very easy to make. It's just cut and glue them and it will be ok.  
Read more