How to Make a 3D Printed “SPY” Folding Rubber Bands Blaster
https://youtu.be/yJ-LaSFo2BQ Hey guys, I am very glad you can click that link and welcome. To be honest, this is my first blog and I believe it will have many places which need to make improvements in the future. STL download: https://www.thingiverse.com/thing:5335227 Chapter I ---- the surprised support First of all, I am going to share one of my experiences when I printed the blaster. If you want to make this little blaster, I hope this experience can help you. Actually when removing the support, I had to be very careful, because there are 2 very small hooks and that parts are connected with support so here is the point. If you remove the support not carefully, maybe the small hooks will break. A fter trying many times, I finally found a better way to print the blaster’s body. Plus, actually this way is a kind of print setting and you can say that's a print position on the hot bed. But the only one disadvantage is that you have to take more time and it's about 2 and half