How to make a 3d Printed Kitchen Towel Holder | quick change

-


At first, this inspiration is from some videos about 3d printing on Instagram. Those gadgets are so interesting and of course also are so useful and amazing. Since I saw those works, I just thought it was possible to build a kitchen towel holder which also has the function of quick change. 

This time I designed a rail and it can be a platform where we can change different modules in the future. 

VIDEO: click

I. STL Download:

II. My Printing Setting:

file name: left arm & right arm 1





file name: left arm2 & right arm2



file name: left holder & right holder




file name: nut & screw

(This time I have used 8 nuts and screws)




file name: platform (rail)




file name: spacer X2

(This time I have used 2 spacer)




III. Difficult Point:

On the whole, this project is not really hard to make. But when I build this project still met some difficult points but generally those are very similar. Because those parts need to use support so when we take off the support we will see that there are many residue of the removed support. That results, for example the rail, the part is very hard to slide into the rail. The resolution is easy but need patience. You need to sand those residue out.

 Here is the key points to be sanded:

the  joint of 2 rail

use wd40

the cylinder

the gap


all of holes




Comments

Post a Comment

Popular posts from this blog

How to Make a karambit from Cardboard (kraft paper 1.5mm)

-
Image
  Project Difficulty Level:  ★ ★ ★ ★ [The diffcult point is to cut the hard kraft paper because this kraft paper is really hard although it is just 1.5mm thick] Template download:  link   [this template is svg files so if you want to print, it's better to convert the svg to pdf in order to print easier and this a convertor website which I always use] Video:  link This time my materials I used is a hard kraft paper and its thickness is 1.5mm. This is very good material but it's just too hard so if this kraft paper is 2mm thick or 3mm thick or thicker it will be very difficult to cut extremely. Actually this project's main diffcult point is how to cut it and it's only one point which need to solve. When made this project I found that I can use a awl to punch holes along the edge line firstly and then use the paper knift to cut the cardboard along those holes. It will be easier to cut. 
Read more

3d Printed Airsoft project part2 | can change bullet

-
Image
     Hey guys, today the part 2 of 3d printed airsoft pistol is coming. It's a little bit unexpected.  This project’s difficulty is harder than I expected. So maybe this project will have more parts. And here is the STL files just click THIS STL download . Video of this project I. My print settings file name: barrel+ file name: body pin1 & body pin2 file name: body1 file name: body2 file name: body3 & body4 file name: bullet casing+ file name: cylinder file name: piston file name: trigger pin1 & trigger pin2 file name: trigger1+ & trigger2+ II. The Expenrice of Making This Blaster Part 1 of this project I tried to make a 3d printed piston compressor as an object which verifies if the project is feasible and that was surprisingly successful work. So from that time I had confidence to finish this project. I want to get a real 3d printed airsoft, in which all the parts are made with 3d printing as much as possible. So that...
Read more

How to Make a Brass knuckles from Cardboard (Kraft Paper)

-
Image
  Project Difficulty Level:  ★ ★ Template download:  link [this template is svg files so if you want to print, it's better to convert the svg to pdf in order to print easier and this a  convertor website  which I always use] Video:  link here the  *link  is the way of how to cut the hard kraft paper. This time This project haven't small parts   so this project actually is very easy to make. It's just cut and glue them and it will be ok.  
Read more